Showing posts with label geothermal heat pump. Show all posts
Showing posts with label geothermal heat pump. Show all posts

Monday, 5 October 2015

WBR-90.0H-A1-S

Wotech WBR-90.0H-A1-S swimming pool heat pump, with the titanium heat exchangers which is made by Wotech, which is with stable performance, leads to efficient heat transfer without any dangers of corrosion from chlorine in the water and creates a longer lifespan.
For more information, welcome to visit www.ecowotech.com
DSC_0136 DSC_0122

Friday, 11 September 2015

The KE Series Geothermal Heat Pump

The KE series geothermal heat pump possesses the COP as high as 4. it is not only save energy but also save maintaining cost.It has few mechanical movement components which are installed underground or indoors to avoid the harsh climate outdoor.
For more product information, welcome to visit www.ecowotech.com
KE-H

Wednesday, 26 August 2015

The single unit for multiple functions can meet the need for heating, cooling and hot water supply at the same time.

The single unit for multiple functions can meet the need for heating, cooling and hot water supply at the same time. In summer it cools the air, in spring and autumn it can simply create hot water, in winter both hot water and heating are available.
The heat pump was adopted intelligent computer control system which brings immense convenience to our customers. Besides, under the modularized system,different models can be assembled according to customers's needs,available for various projects.
Do you want to get more information about this heat pump? Welcome to visit our website www.ecowotech.com.
Wotech Heat Pump Water Heater

Tuesday, 25 August 2015

Australia Standard Hot Water Heat Pump

The hot water heat pump with mental casing, designed with double wall heat exchanger which is according to the Australian standard. The water temperature could be up to 60 degree. If you want to get more information, welcome to visit our website www.ecowotech.com
hot water heat pump with double wall heat  exchanger

Friday, 24 July 2015

Are you still could not find the high temperature pool heat pump?

Are you still in the trouble that could not find the high temperature pool heat pump? Wotech could help you with this problem. Wotech published the PPR sheel titanium heat exchanger, which is specially designed for the high temperature pool heat pump. The capacity could reach up to 55kw, which made up for thetraditional pool heat pump that could not work in the high temperature.
WBR-45.0H55.0H-A1-S

Thursday, 23 July 2015

Every heat pump produce in wotech has its own unique bar code

Every heat pump produce in wotech has its own unique bar code, which is marked all information of the according heat pump, convenient for customer to feedback any information of the heat pump and we could check the problem easily by scan the bar code at once. For more please visit our website www.ecowotech.com
QQ截图20150723170747QQ截图20150723170845

Tuesday, 14 July 2015

Just finished a 20 feet container loading of Wotech heat pump.

Just finished a 20 feet container loading of Wotech heat pump. We always promise you the delivery on time. For more information, welcome to visit www.ecowotech.com

Tuesday, 24 March 2015

The CHINA INTERNATIONAL SAUNA&SPA&POOL FAIR 2015 will be held in Guangzhou

bianpin_副本
invitation1
The CHINA INTERNATIONAL SAUNA&SPA&POOL FAIR 2015 will be held in Guangzhou. WOTECH will be at the T23A booth. Welcome to visit us and thanks for your attention for our brand new inverter pool heat pump. For more information www.ecowotech.com

Friday, 20 March 2015

WOTECH Designed the Special Heat Pump for the Hair Solon.

WOTECH have made a sufficient market research for salon before developing the salon waste heat recycle heat pump. WOTECH found some problems of the solon: 1. Lots of hair solons are located in the street where the space for the heat pump installation is limited. 2. Solon requirs the water temperature should be 42 degree, so the directly heating is perfect and energy saving. 3. During the hair washing, the hot water drop down from the hair, which is still 35 degree and go into the sewer, it waste a lot. 
After years research, WOTECH has developed the hair solon special heat pump, in the heat pump, we installed a recycle device to recycle the heat from the waste water, which could better use the heat from the waste water and increase the temperature above 30 degree of the running water and accelerate the heating speed. 
Besides, this heat pump adopts the all in one design, convenient for installation. 1.5P main unit with the 200L water tank. Due to this heat pump has the heat recycle device, so the 1.5P main unit could supply up to 6 tons water every day.
For more information of the product series, welcome to visit www.ecowotech.com
01

Sunday, 15 March 2015

Wotech titanium heat exchanger with PPR shell

Wotech specially design a titanium heat exchanger with PPR shell for the high temperture pool heat pump, which the heating capacity could be up to 55kw and suitable for SPA application. This revolution solve the problem of the traditional pool heat pump which could not work in the high temperature for a long time. For more heat pump information welcome to join us on www.ecowotech.com
PPR

Wednesday, 11 March 2015

Wotech Inverter Pool Heat Pump

WOTECH Inverter Pool Heat Pump, new inverter technology for your swimming pool, which could bring you the new experience of swimming and more energysaving. For more information welcome to visit www.ecowotech.com


DSC_021511
invitation1

Saturday, 28 February 2015

Heat pump---The third generation of heating

In the first generation of heating, what we pursuing is just being offered heat no matter by what methods in the cold season. In the second generation, we more focus on the efficiency, except the heat we needed in the winter, we also pay more attention on the energy use. In the third generation, we put forward a higher requirements for heating, not only require for heating, but also the health and environment. So the air source heat pump has been the popular choice in the new heating generation, which plays an important role on the heating development. For more information of the heat pump heating, welcome to visit us on www.ecowotech.com
QQ截图20150301102024

Wotech is under the busy delivery and new order production

The first day after the Chinese New Year, Wotech is busy with the delivery and the new orders. Welcome to visit our factory and for more information please click the our website www.ecowotech.com
QQ截图20150228165847

Tuesday, 10 February 2015

How to make a good pipes installation?

Heat pump brand is very important, but so many attentions needed when installing.Below is common analysis:
When decorating, you should consider direction of PPR pipe. Before hiting and pressing test, please ensure no leak after connecting cold and hot water pipes, then cover cement. When finish decoration, please remove the soft pipe, or hot water pipe and cold water pipe will mix. So before you install air source heat pump, please check it carefully.
Basic principle:
1.the shorter the pipes, the better. try best to keep pipes in vertical or horizontal, which can utmostly reduce the resistance of water flow.
2.Good insulation materials for pipe warm keep work.
3.Install place, height, direction of valves should be tight.
4.Soft connect at inlet and outlet of water pump and heat pump, to reduce shake to building.
5.Add filter before inlet and outlet of water pump and heat pump, to prevent the impurities.

Sunday, 8 February 2015

Which way is good for heat pump deforsting?

Heat pumps are always placed on balcony of top roof, which will lead frosting in winter and effect the daily using of consumers.
Natural Defrosting: Keeping working for a while, then stop, and the heat from compressor will defrost, but it will take a long time.
Hot Gas Defrosing: Compressor will exhaust, and hot air will defrost.
Electric Assist Defrosting: Common factories will supply this kind of defrosing. When defrosting, stop compressor, fan and magnetic valve, system will automatically defrosing, open valve after finishment, system will start to
work.
In summary, electric assist is the best way, however if your heat pump is very easily frosting.
frozenheatpumps

Thursday, 5 February 2015

Wotech all staff wish you a Happy Chinese New Year

Chinese New Year is an important traditional Chinese holiday celebrated at the turn of the Chinese calendar. In China, it is also known as the Spring Festival, the literal translation of the modern Chinese name. Chinese New Year celebrations traditionally run from Chinese New Year's Eve, the last day of the last month of the Chinese calendar, to the Lantern Festival on the 15th day of the first month, making the festival the longest in the Chinese calendar. Because the Chinese calendar is lunisolar, the Chinese New Year is often referred to as the "Lunar New Year".
Chinese New Year is centuries old and gains significance because of several myths and traditions.  Chinese New Year is celebrated in countries and territories with significant Chinese populations, including Mainland China, Hong Kong,Macau, Taiwan, Singapore,Thailand, Indonesia, Malaysia, Mauritius,Philippines and also in Chinatowns elsewhere. Chinese New Year is considered a major holiday for the Chinese and has had influence on the lunar new year celebrations of its geographic neighbours.
heat pump

Wednesday, 4 February 2015

Air Source Heat Pump Water Heater Insitallation

1) The installation should be processed after checking the materials and tools.
2) Safety is the most important, be carefull of the building falls and the electricy
3) When welding, please take care of the tank surface and heat pump unit.
4) Heat pump and water tank installation should base on balance placed clean and beauty, tight located.Attention on the warm keep work of the pipes.
5) No blocking or leakage of fabrication and installation, pipes and collectors meet the slope requirements, try best to make them tidy, beautiful, solid and reliable, firmly welded structures and weld neat and sleek.
6) System connections are secure and reliable, strong wind resistance. Comprehensive self-test after the completion, ensure safety basis on self-qualified
tc-1

Sunday, 1 February 2015

Air Source Heat Pump Water Heater Insitallation

1) The installation should be processed after checking the materials and tools.
2) Safety is the most important, be carefull of the building falls and the electricy
3) When welding, please take care of the tank surface and heat pump unit.
4) Heat pump and water tank installation should base on balance placed clean and beauty, tight located.Attention on the warm keep work of the pipes.
5) No blocking or leakage of fabrication and installation, pipes and collectors meet the slope requirements, try best to make them tidy, beautiful, solid and reliable, firmly welded structures and weld neat and sleek.
6) System connections are secure and reliable, strong wind resistance. Comprehensive self-test after the completion, ensure safety basis on self-qualified
IMG_2883

Saturday, 31 January 2015

Seven Questions When Choose the Heat Pump

1, Where heat pump be installed?
According to statistics.90% of consumers will to install the heat pump at the balcony or floating window. which do not take room space, and leave enough space for air flow to keep efficiency.
2, How long distance between heat pump and water tank?
Better within 3 meters, the shorter, the less cold water.
3, House in decoration, when install heat pump ?
Before install water and electricity, ask the experts to design the pipe placement, and ensure the best idea to place the heat pump, then start.
4, Can heat pump be installed in old house?
You can choose the roof ceiling or the wall mounted water tank.
5, How change from other heaters to air source heater?
Air source heat pump is easy on installation, just need to connect the old hot water pipe to heat pump hot water outlet port.
6, What is the pressure request on air source heat pump?
Water tank is bearing, only if tap water pressure, then no special request on water pressure.
7, If tank at the first floor, water needed at third floor, how is that be?
If tap water go to third floor, then hot water will reach there.

Wednesday, 28 January 2015

How to reduce heat pump noise?

The normal highest noise for heat pump is 50 to 60dB(A), but some intel-brand can make that to 43dB(A), Generally it is acceptable within 60dB(A), which is similar to indoor talking.
So we can reduce noice from two aspects:
1, Compressor shake: Normal compressor will rub with floor, or will impact with tubes and cases.
2, Fans: As the unscientific installation of the heat pump, it will case shrill voice.
We suggest below items:
1, Floor installation: If floor, better use some rubber to release shake and keep horizontal.
2, Balcony installation: we suggest a 45 degree diagonal bracing, to depart the press from vertical and horizontal.
3, Indoor window installation: Most time, heat pump is mounted beside the indoor window, we suggest keeping heat pump flown direction is perpendicular to wall, and parallel to indoor wall, by this installation, it can release the noise from wind flow.
blog directory
blog directory