Wotech heat pump projects for villa in Hubei China.

Wotech heat pump projects for villa in Hubei China.For more #heatpump information, Please visit our website www.ecowotech.com to know more about our products.

Pool Heat Pump with Dark Gray Colour Galvanized Case

Wotech WBR-12.5H-B10 with dark gray colour galvanized case. We could customize the colour for your special requirement to cater to different markets.

For more wotech heat pump information, welcome to visit http://www.ecowotech.com/site/blog or leave your comment, we will reply you assoon as possible.

WOTECH BK/BL-H2 Series Drying Heat Pump

Wotech BK/BL-H2 drying heat pump is designed with the intelligent system to maintain regulated temperature and humidity, which could provide high are temperature up to 80 degree for drying.

For more information, welcome to visit www.ecowotech.com

Air source heat pump, just use the 1/4 energy of the electric heater

Air source heat pump, just use the 1/4 energy of the electric heater, which could save 1500 kw per year for one family. It equals 94 trees planting and 1495.5kg carbon dioxide absorbing for the earth. Take the responsible to save the earth, enter www.ecowotech.com to get more information.

Another Member in Wotech BR-B3 Family

There is another member in the BR-B3 family. The difference of this pool heat pump is with injection plastic shell, which is fashionable and durable for using. For more information welcome to visit www.ecowotech.com

Wotech drying heat pump realize the drying with the low temperature in a close cycle

Wotech drying heat pump realize the drying with the low temperature in a close cycle, which dry the material in a good quality. Through controlling the device condition, the dry air temperature in the drying room could be 20~80 degree, which could cater a large part of heat sensitive material in good quality drying requirement. With the drying mideum close cycle, it could perfectly isolate the outside air exchange,which would bring the pullution to the material. This is specially important to the food, medicine and biological product. Besides, when the material is sensitive to the oxygen, it also could adopt the inert medium to take the place of air as the drying medium, which realize the dtying without oxygen.

For more heat pump information, welcome to visit www.ecowotech.com

The CHINA INTERNATIONAL SAUNA&SPA&POOL FAIR 2015 will be held in Guangzhou

The CHINA INTERNATIONAL SAUNA&SPA&POOL FAIR 2015 will be held in Guangzhou. WOTECH will be at the T23A booth. Welcome to visit us and thanks for your attention for our brand new inverter pool heat pump. For more information www.ecowotech.com

Inverter Pool Heat Pump Model WBR-22.0HP-B1

WBR-22.0HP-B1 models are designed with the latest inverter technology, which could more precisely control the temperature for your swimming pool, Koi fish growing as well as SPA. For more information welcome to visit www.ecowotech.com

WOTECH Inverter Heat Pump---With the latest inverter technology

WOTECH Inverter Heat Pump---With the latest inverter technology, which deepen the revolution of the energy saving and have a better performance on temperature conrol. It will be shown on the Guangzhou fair. Welcome to visit our booth. For more information, please visit www.ecowotech.com.

Welcome to visit us on the China trade fair

We hereby sincerely invite you and your company representatives to visit our booth on the GUANGZHOU, SHANGHAI,BEIJING trade fair. Look forward to see you soon! For more information please visit us on www.ecowotech.com

Wotech help you to simplify the floor heating installation

Recently, all the salesman in Wotech are busy with learning how to install the floor heating by themselves. All of them should practice and pass the test, which make sure all the salesman could help the customers to know clear the floor heating and the installation. For more information welcome to visit us on www.ecowotech.com

Are you still could not find the high temperature pool heat pump?

Are you still in the trouble that could not find the high temperature pool heat pump? Wotech could help you with this problem. Wotech published the PPR sheel titanium heat exchanger, which is specially designed for the high temperature pool heat pump. The capacity could reach up to 55kw, which made up for the traditional pool heat pump that could not work in the high temperature. For more heat pump information, welcome to visit www.ecowotech.com

Wotech air source heat pump brought in the external agent for management to ensure the rapid development of the enterprise.

Enterprise management is an indispensable elements in the process of enterprise survival and development. An enterprise's success or failure often depends on the scientificity and rationality of the enterprise internal management system.So, when face to the fierce market competition, the enterprise wants to continue to grow stronger, it must innovate in different aspects in the system, technology, market, such ability in an impregnable position.

With the rapid development of air source heat pump industry, the choices consumers facing are also becoming more and more widely. How to work out the most suitable for consumer products? Wotech consider that constantly improving the company's internal management system, to carry out the refining management, is not only beneficial to maintain the rapid development of the enterprise itself, but also can provide the market with more suitable products for the usesr, create greater value for customers.

Wotech is under the busy delivery and new order production

The first day after the Chinese New Year, Wotech is busy with the delivery and the new orders. Welcome to visit our factory and for more information please click the our website www.ecowotech.com

How to make a good pipes installation?

Heat pump brand is very important, but so many attentions needed when installing.Below is common analysis:

When decorating, you should consider direction of PPR pipe. Before hiting and pressing test, please ensure no leak after connecting cold and hot water pipes, then cover cement. When finish decoration, please remove the soft pipe, or hot water pipe and cold water pipe will mix. So before you install air source heat pump, please check it carefully.

Basic principle:
1.the shorter the pipes, the better. try best to keep pipes in vertical or horizontal, which can utmostly reduce the resistance of water flow.
2.Good insulation materials for pipe warm keep work.
3.Install place, height, direction of valves should be tight.
4.Soft connect at inlet and outlet of water pump and heat pump, to reduce shake to building.
5.Add filter before inlet and outlet of water pump and heat pump, to prevent the impurities.

Which way is good for heat pump deforsting?

Heat pumps are always placed on balcony of top roof, which will lead frosting in winter and effect the daily using of consumers.

Natural Defrosting: Keeping working for a while, then stop, and the heat from compressor will defrost, but it will take a long time.

Hot Gas Defrosing: Compressor will exhaust, and hot air will defrost.

Electric Assist Defrosting: Common factories will supply this kind of defrosing. When defrosting, stop compressor, fan and magnetic valve, system will automatically defrosing, open valve after finishment, system will start to
work.

In summary, electric assist is the best way, however if your heat pump is very easily frosting.

Air Source Heat Pump Water Heater Insitallation

1) The installation should be processed after checking the materials and tools.
2) Safety is the most important, be carefull of the building falls and the electricy
3) When welding, please take care of the tank surface and heat pump unit.
4) Heat pump and water tank installation should base on balance placed clean and beauty, tight located.Attention on the warm keep work of the pipes.
5) No blocking or leakage of fabrication and installation, pipes and collectors meet the slope requirements, try best to make them tidy, beautiful, solid and reliable, firmly welded structures and weld neat and sleek.
6) System connections are secure and reliable, strong wind resistance. Comprehensive self-test after the completion, ensure safety basis on self-qualified

Why more and more users prefer the floor heating?

Why more and more users prefer the floor heating? Wotech will tell you the answer.

1.Comfortable: Floor heating by air source heat pump with the feature of warming from the feet, which the temperature could be distributed uniformly in the rooms, without the hot wind, so that it could keep the moisture in the body, at the same time it has the curation effect on the rheumatism and asthma.

2.Energy saving: Floor heating by the air source heat pump is adopted the 35-45℃ hot water, the heat focus on the body benificial temperature, which could save the energy up to 75% than the traditional heating systems.

3.Space saving: The floor heating system with pipes will be cover under the floor, which could save the space and match the different decoration styles.

4.Long life time: The floor heating system pipes are cover under the floor,which is no scaling,no corrosion, no human-caused damage, so the life time is the same with the building. Comparing to the central air condition and radiator, the floor heating save much more cost of the maintain and replacement.

For more heat pump information welcome to visit us on www.ecowotech.com

What is The Features of Wotech Heat Pump?

1. Golden corrugated fins with special louver shape to increase heat transfer co-efficiently, application of nano technology.

2.Wire heater on bottom panel to avoid frosting.

3.Optional mobilizable feet for installation, suitable for heavy snowy area.

4.The rotary or scroll compressor used within the heat pumps is compact, light, highly efficient, powerful and durable. The compressor is held by springs in its casing to minimize vibration, while special vibration isolation rubber lowers the vibration transmission to a minimum. A complete set of safety devices such as over-current relay, compressor thermail protector encased in the motor coil, high pressure switch, and crankcase heater ensures a longer life-cycle and problem-free operation.

5.We integrate intelligent, wireless, central control, and monitor multiple units all over the world by cell phones or computers.

6.The heat exchanger on the water side is of coaxial type, made from seamless carbon steel tube for outer tube and inner twisted copper tube. Comparing to other smooth tube-in tube heat exchangers, the configuration of a spiral twisted tube creates a two-counter-directional flowing pattern, with a hot and cold side, ensuring the highest heat transferring efficiency. It also possesses its compactable size, adaptability, durability and leakage protection.

For more information welcome to join us on www.ecowotech.com

Why good quality heat pump can be made in Wotech?

Wotech is now one of the biggest export enterprise of heat pumps, with ability of its own R&D, manufacturing, selling and service system. Wotech's heat pumps have been exported to more than 90 different countries all over the world, with turnover of 136 millions in 2009. Wotech has been ISO9001:2000,GMC(Global Manufacture Certificate) certified and with products UL(USA），CE（Europe), 3C(China) certified.